Sunday, 28 July 2019

The Devil Rides Out



 This weekend, Chickenhawk made his debut appearance in a game of Apocalypse of all things, with Alistair, Jordan and Rhys.


I think we played 300 power level, Imperium vs. Chaos (ahh the classics!) but not entirely sure.


Since I haven't bought the game or read the rules and I don't have a Chaos army, this presented a bit of a problem.


Fortunately Jordan brought the 14th Black Crusade with him and flanked my newly painted model with two Warhound Titans, a brace of Chaos Knights, supporting Armigers and assorted Nurgly goodness.


This did not prevent Chickenhawk from being brutally violated in the end but he managed to give a fairly decent account of himself.  It was quite enjoyable and nothing like the all-day marathons of yesteryear.  I may even pick up the rules!

What are rules, really?
Still love my scenery
Grand Melee
Orbital Scan

Newly painted model syndrome strikes!


Infantry did not play a significant role in proceedings
Managed to get a side-by-side with a real Chaos Knight
This reminded me of William Blake's 'Red Dragon' for some reason
Hold the line! (Every single one of those missiles is individually magnetised.  All is right with the world)


Friday, 19 July 2019

No Chaos Knights were made during the harming of this model


Fresh from the fires of Forgeworld Monkeychuka, a new knight is summ... erm.. forged! (Helforge you say?  Goodness me, no!  That would be heresy!)

I finally got all the lights working by blu-taccing the wires and battery in place.  Turns out the battery was resting on top of two large neodymium magnets which attach the torso to the legs.  This had an adverse effect on the battery's machine spirit.  I stuck it further up the side of the main body and uttered a short prayer to The Omnissiah which must have worked because the lights came on.


I continued building and gluing stuff right up to the end.  Three cables were added between the legs where the pennant thing normally goes on a night.  I had no intention of hanging a flag off his balls but some dangly bits were perfectly acceptable.

A bit of oil splatter was added to the marble to symbolise the stain of chaos.


I've included a couple of pictures with the pauldrons in place but this was just to prove that I finished them really.  This bad boy wants to go bare shouldered and show off his muscles.

I have no intention of...  ..in game.. ..strangely..  .. butt it turned out ok...

Carefully dipped in Chaos
monk

Together we will conquer
Together we will conquer

Wipe that cheeky grin and come on down.



+++++++++++++++++++++++++
 ++scrapcode detected ++
+++++++++++++++++++++++++
...eychu 
..ka...

Oh well, the Devil makes us sin
But we like it when we're spinning in his grip.


++purge++

I'm yours, I'm yours
Why does the blood never stick to your teeth
Mama stop giving me grief


++devotional psalm A237F1 inneffective++


The cradle is soft and warm
Couldn't do me no harm

++choral psalms 1 thru 6928 inneffective++


Why does the blood always stick to your teeth

Mama stop giving me grief


++cleansing prayer !Omnissiah! inneffective++


Cleanse me deep in the fire
I have become pure water
I wear my sword at my side

I wear my sword at my side


++++++++++++++++++++++++++++++++++++++++++
++scrapcode detected - multiple heresies++
++++++++++++++++++++++++++++++++++++++++++


System compromised...  

Cease all communication immediately...  

Punitive detachment inbound...  


May The Holy Emperor blot out your transgressions.


Sunday, 14 July 2019

Clockwork Beast


 I'm nearing the finish line on this.  I got impatient though and started playing with the lights again.  The blue mega light just wasn't doing it for Tzeentch strangely.


I preferred the green but I only had one and it was a chip, and therefore too small.  I had a cool white mega light and figured I could try to make it look green.


So I pulled a decorative green crystal off one of my Necron bases and chopped it up.  I was able to superglue it on the end of the LED and I like this better.


Not sure about the safety implications.  I'll probably set fire to the model before it's finished at this rate.
c
st
est
east
Beast
o
rk
ork
wock
clockwork
ClockworkBeast
ClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeastClockworkBeast
buffer purge
++++++++++++++++++++++++
++ Scrapcode Detected ++
++++++++++++++++++++++++


++flee++


Sunday, 7 July 2019

All about that bass


I had to break the knight down into 53 sub assemblies and that's just masochism.   I belatedly remembered that the piping/door handles were still on the sprue had to add them.  I can't believe I forgot during the build but it was deliberate, at first.  Once you release a tiny piece of model from the safety of its little sprue prison, it becomes a ticking time bomb.  Just waiting for that perfect opportunity to disappear discreetly down the back of the sofa.  Something you don't notice for days, even weeks and end up howling in despair and frustration because you know, for certain, that you will never see the cursed thing again and now the model is ruined.

All cut up and finding the negative spaces very interesting

So the handles stayed on the sprue till the last possible moment. However, right at this very moment I am convinced that I'm going to ruin it with paint.  I spent so much time and money on this folly, it is probably a stupid idea to be going all 'experimental'.  Nevertheless, I have committed to colorshift metal paint.  And copper and bone effects.  And gloss black paint.  And door handles.  As a daemonic entity, you never know when a convenient handhold is going to save your bacon.

I used plasticard, sprues, blu tac, green stuff and lashings of glue

Then of course, there was the base which I had no idea what to do with.  It all began to seem like too much effort and I started watching shite on Netflix instead of painting.  Inspiration finally arrived in the form of plasticard.

Tidied up with milliput

The half painted knight was a bit monochrome so I added some bone effects to the head and missile lanuchers.  It seemed ok but I needed more of the same colour to set it off.

Primed and recess shaded

I thought it might be good to contrast the dark themed model with a clean base and started mucking around with a sheet of thick plasticard.  If I chopped it up, maybe I could make it look like marble.  A cream coloured marble base would pick out the bone colours nicely, I thought.  Admittedly, I'd never tried to paint marble before so this could easily end in disaster but there are a surprising number of tutorials out there.

Ok I may have gotten a bit carried away with the veins.  And you can't tell that I used Brass Scorpion.  Oh well. 

After watching them and downloading a batch of marble pictures from shutterstock I reckoned I would try my hand at a brownish, cream marble with metallic veins.  I'm not going to post the inspirational pictures because mine looks nothing like them.  It is however very acceptable and may have gotten me back into the painting mood.   I definitely enjoy building models more than painting them and the whole base only took 3 evenings from concept to paint drying.

Glazing medium is fucking magic in a bottle